Can my mepco bill be reduced?

Yes your mepco bill can be reduced by following steps: Avoid high energy consumption in peak hours. Unplug and turn off all unused appliances. Use energy saving bulbs and electric appliances.

Online Mepco Bill Calculator – Estimate Your Bill Using Latest Digital Tool 2026

Estimate Your Bill By Entering Consumed Units

MEPCO Bill Calculator

Estimated Bill Summary

Collapse

Electricity Cost

F.C Surcharge

GST

Total Bill

Note: Estimated bill (FPA & adjustments not included).

Getting worried about “What will be your electricity bill this month?”, also you’re confused about “how much budget you should set for the bill?. Here is the good news, stop guessing, you can estimate your current month bill based on units within a seconds. The Mepco Bill calculator is an online 100% free easy to use bill calculation tool. You have to enter the units that you think you have consumed in the tool and it will automatically calculate your bill.

What is the MEPCO Bill Calculator Online?

This digital bill calculation tool works on the officially approved tariff rates by NEPRA. For the bill calculation this tool uses the slab rates issued by NEPRA for your bill. Slab means different rates for the electricity consumption for the different levels of consumers. If your electricity consumption is higher you have to pay more, on the other hand if you use less energy your slab rate will be different.

Instead of getting worried or guessing your bill. You can estimate your bill using this mepco bill calculator online. You can calculate your units by subtracting the present reading of your previous bill from the current reading on your meter.

How to use a mepco bill calculator?

You don’t need complex calculations to estimate your bill. You can use this easy to use digital tool. For manual calculation, you can follow these steps:

Before you use a mepco bill calculator tool or do manual calculation. You have to calculate your consumed units.
See your current meter reading and subtract it from the previous bill.
If your consumed units are less than 200, you’re in a protected slab else expensive slab will be applied.
Multiple your consumed units with the slab rate.
For 100 units the slab rate will be cheap.
For Next 100 Units the slab rate will be slightly expensive.
If your units are more than 200, then an expensive slab will be applied and other charges will also increase.
For more than 300 units, the very expensive slab will be applied to your bill and other charges will also increase.
After calculating the units, now add these taxes and charges to your calculation.
Fixed price from 75-150 ( Depends on your connection type ).
Fuel Price Adjustment ( FPA ).
General Sales Tax (GST) at from 15% to 18%.
Meter rent ( fixed 200 ).
Fixed PTV Fee of Rs 35.
After adding these, your final estimate will be ready.

Example of Bill Estimation ( For 150 Units )

Type of Charges	Calculation	Amount
First 100 Units	100 X 10.54	1,054
Next 50 Units	50 X 13.01	650.50
Fixed Charges	–	75
Govt Taxes	–	336
Electricity Duty	–	30
PTV Fee	–	35
QTA	–	200
Total Estimation	–	2,380

MEPCO Bill Calculation Formula

The Mepco Bill calculator works on this simple formula:

Total Bill = ( Units Consumed X Slab Rates + Taxes & Charges )

Taxes and charges may vary each month.
Slab rates are regulated by the NEPRA.

That’s why the mepco bill calculation tool is more reliable than the manual guessing.

Tariff Rates of MEPCO

The power companies of Pakistan use the approved rates from National Electric Power Regularity Authority ( NEPRA ). These tariff rates can be changed anytime ( visit the NEPRA for latest updates ). Also, the mepco bill calculator online use these rates.

Units Consumption	Category
0-100 Units	Low Rates
101-200 Units	Medium Rates
201 – 300 Units	Higher Rates
301+ Units	Expensive Units

MEPCO Slab Rates in Pakistan

Understanding these mepco slab rates will help you in reducing your electric bill:

Total Units	Slab Rates
First 100 Units ( if your consumed units are less than 101 )	Cheaper ( 10.54 / Unit )
Next 100 Units ( If your consumed units are less than 201 )	Slightly Expensive ( 13.01 / unit )
More than 201 ( if your consumed units are more than 200 )	Expensive ( 33.1 / unit )
300+ Units ( If your consumed units are more than 300 )	Very Expensive

What Other Charges & Taxes Added In The Bill Except Energy Charges?

The energy charges ( units calculation ) is just one part of your bill in mepco online bill estimator. There are multiple additional charges added on top of your bill each month. All of those are mentioned below:

FPA: Fuel Price Adjustment, these are added for the fuel consumed for generating and supplying electricity. These can increase / decrease each month which is reviewed by the NEPRA. Visit the official site of NEPRA for latest updates.
GST: A govt tax which is added by the Federal Board of Revenue not by MEPCO.
ED: Small amount of fixed charges set by the Govt of Punjab.
Meter Rent: Small fixed amount charged for the maintenance of your electric meter.
PTV Fee: Small fixed amount set by PEMRA.
QTA: These charges are added after every 3 months to cover the gap between what you have already paid and the actual supply cost.

Best Way to Use Mepco Bill Calculator Online

The mepco bill calculator will work best if you do following things:

Check the meter reading frequently.
Stay updated with NEPRA.
Note down the weekly usage of electricity.
Using the online mepco bill calculation tool.

If you do it on a daily basis, you will track the power consumption and avoid the additional electricity usage.

Estimating Bill Using Mepco Online Estimation Tool VS Manual Calculation

Here is the comparison of both methods. Use which is more accurate and reliable

Method	Accuracy	Time	Effort
Tool	Moderate ( Fixed Rates and take time to update )	Instantly	No Effort
Manual	Accurate ( As you know the latest slab rates set by NEPRA )	Time Consuming	High

Avoid these mistake while calculating bill

Make sure in which category you fall? Protected or Non Protected. If you have consumed more than 200 units in the last 6 months, then you will fall in the non-protected category.
Misreading the meter reading OR last bill present reading. If you did it wrong, final units consumption won’t be exact.
Using the old tariff rates while estimating the bill.
Visit the NEPRA to get the latest update about the electricity charges.
Avoiding the taxes in your bill calculation.

Common home appliances and their units consumption

This table will help you a lot in estimating your current month bill. This table is prepared after tracking the power consumption of each electric product in my house. All are explained below:

Appliances	Daily Usage	Units Consumption / Month
Ceiling Fan ( 75 Watt )	8 hours	18
LED Bulb ( 100 Watt )	8 hours	2.4
Refrigerator	24 hours	45 – 60
Clothes Iron	30 Minutes	10 – 15
Washing Machine	1 hour	15 – 20
AC 1.5 Ton Invertor	8 hours	90 – 130
AC 1.5 Ton Non-Invertor	8 hours	150 – 200
Water Pump ( 0.5 HP )	2 hours	15 – 25
Electric Geyser	1 hour	25 – 40
LED TV ( 40 Inches )	5 hours	8 – 12

Tips to reduce electricity bill

Use less energy in the peak hours.
Use LED bulbs instead of high watts.
Use natural sunlight instead of using multiple bulbs in daytime.
Set AC to 26 degrees for lower energy consumption.
For more visit this page.

FAQs

No, it’s not 100% accurate, it just gives you an estimate of your bill. So, you can use energy accordingly.

No, the tool on mepcobillcheckk.pk is designed for residential connections. But using the formula and latest slab rates for the commercial connections. You can manually estimate your current bill.

The main reason for the difference is taxes and charges like FPA, QTA and GST.

There is no official mepco bill calculator tool issued by the MEPCO. You can check it using mepcobillcheckk.pk which uses the same formula and bill calculations used in the actual bill.

Consumers who consume units less than 200 fall in the protected category. The consumers who consume more than 200 units fall in the non-protected category and will stay in this category for the next 6 months.

The slab rate for the protected consumers is cheaper ( subsidized rates ) than the non-protected users.

Use this simple formula ( Consumed Units X Slab Rate + Taxes ). Before you estimate your bill ensure your category ( protected / non-protected ) and the latest tariff rates from NEPRA.

Yes your mepco bill can be reduced by following steps:

Avoid high energy consumption in peak hours.
Unplug and turn off all unused appliances.
Use energy saving bulbs and electric appliances.